Hi
I have exactly the same issue! FW 7.13
This problem occurs when traffic is between the vlans and to external interface. Interesting thing is if you disable some of interfaces no matter it is included in a vlan or bridge or even active, this issue disappears for a while / between 1-5 minutes/ and then again. I do also tried with different uplink interfaces and speeds, as copper, dac 1G, 10g, SFP, 1g, 10g - problem is still there
In the same vlan problem doesn’t persist!
my config is: CCR2004-16G2S+ configured as CoreSwitch with several vlans on one bridge interface assigned to all eth interfaces /exept eth1,2 as they are for ISPs/. Uplink is 10G with DAC to FS S3900-48TS6 10G switch
I have tried different configurations for vlans on bridges or standalone even LACP for uplink on different interfaces without any success
On my opinion there is a batch with faulty CCR2004…
Finally I have replaced the CCR2004 with one HEX-S for a while and by the way HEX is working like a charm with the above configuration…
Do you have any new experience with this issue?
I have exactly the same issue! FW 7.13
This problem occurs when traffic is between the vlans and to external interface. Interesting thing is if you disable some of interfaces no matter it is included in a vlan or bridge or even active, this issue disappears for a while / between 1-5 minutes/ and then again. I do also tried with different uplink interfaces and speeds, as copper, dac 1G, 10g, SFP, 1g, 10g - problem is still there
In the same vlan problem doesn’t persist!
my config is: CCR2004-16G2S+ configured as CoreSwitch with several vlans on one bridge interface assigned to all eth interfaces /exept eth1,2 as they are for ISPs/. Uplink is 10G with DAC to FS S3900-48TS6 10G switch
I have tried different configurations for vlans on bridges or standalone even LACP for uplink on different interfaces without any success
On my opinion there is a batch with faulty CCR2004…
Finally I have replaced the CCR2004 with one HEX-S for a while and by the way HEX is working like a charm with the above configuration…
Do you have any new experience with this issue?
Statistics: Posted by ngeorgiev — Sun Feb 11, 2024 4:49 pm