Dear All,
The device is RB4011iGS+5HacQ2HnD on 7.11.2 set up as a simple Dual AP home router.
There is an additional virtual WiFi network on the 2.4 GHz.
The problem is that Default Forward works on physical 2.4 GHz (wlan2) and 5 GHz (wlan1) interfaces, but does not work on a virtual one (wlan3).
It is set to "yes" to let WiFi clients see one another in all of the interfaces. From the wlan3, I can only access the router, but none of the other clients or non-eth-connected devices.
Any hints on how to solve this are appreciated.
Thanks in advance.
The device is RB4011iGS+5HacQ2HnD on 7.11.2 set up as a simple Dual AP home router.
There is an additional virtual WiFi network on the 2.4 GHz.
The problem is that Default Forward works on physical 2.4 GHz (wlan2) and 5 GHz (wlan1) interfaces, but does not work on a virtual one (wlan3).
It is set to "yes" to let WiFi clients see one another in all of the interfaces. From the wlan3, I can only access the router, but none of the other clients or non-eth-connected devices.
Any hints on how to solve this are appreciated.
Thanks in advance.
Code:
0 R name="wlan1" mtu=1500 l2mtu=1600 mac-address=78:9A:18:94:9D:D3 arp=enabled interface-type=QCA9984 mode=ap-bridge ssid="SSID1" frequency=5180 band=5ghz-a/n/ac channel-width=20/40/80/160mhz-Ceeeeeee secondary-frequency="" scan-list=default wireless-protocol=any vlan-mode=no-tag vlan-id=1 wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=no default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default compression=no 1 R name="wlan2" mtu=1500 l2mtu=1600 mac-address=48:A9:8A:CC:F2:6E arp=enabled interface-type=Atheros AR9300 mode=ap-bridge ssid="SSID2" frequency=auto band=2ghz-b/g/n channel-width=20/40mhz-XX secondary-frequency="" scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=no default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=IoT compression=no 2 R name="wlan3" mtu=1500 l2mtu=1600 mac-address=4A:A9:8A:CC:F2:6E arp=enabled interface-type=virtual master-interface=wlan2 mode=ap-bridge ssid="SSID3" vlan-mode=no-tag vlan-id=1 wds-mode=disabled wds-default-bridge=bridge wds-ignore-ssid=no bridge-mode=enabled default-authentication=no default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=defaultStatistics: Posted by pczekalski — Sat May 31, 2025 8:56 pm