Hi,
i have Mikrotik hAP as a router and Cisco CBS250 Switch for Dante network. I have an audio device in Dante network that demands it´s control network to be in a different subnet than Dante network.
So, my plan is to have both subnets (control VLAN 1=10.0.1.0/24, Dante VLAN 20=192.168.20.0/24) available through my routers wlan interface. Because that way you could move around with your laptop and access both device control and Dante Controller.
My question is, what would be the best way to access both subnets from wlan? Should I make VLAN trunkline between router and switch or separate ports and interfaces?
Thank you for all who have knowledge to get me started with this.
i have Mikrotik hAP as a router and Cisco CBS250 Switch for Dante network. I have an audio device in Dante network that demands it´s control network to be in a different subnet than Dante network.
So, my plan is to have both subnets (control VLAN 1=10.0.1.0/24, Dante VLAN 20=192.168.20.0/24) available through my routers wlan interface. Because that way you could move around with your laptop and access both device control and Dante Controller.
My question is, what would be the best way to access both subnets from wlan? Should I make VLAN trunkline between router and switch or separate ports and interfaces?
Thank you for all who have knowledge to get me started with this.
Statistics: Posted by ArttuH — Tue Mar 04, 2025 11:57 pm