Hello, I have a question. I made a Bridge on Wireless 2.4 GHz between AX3 (AP) and cAP AC (station bridge), the signal between them is -58. I have only one IP camera connected to the station bridge, which records on the NVR, the problem is that TX/RX errors are constantly accumulating on the Wifi interface every 3-4 seconds, I have 4-5 errors, mostly on the RX side of the AP. I don't have any errors on the Station Bridge side, I have many such connections made with other devices, but I don't have such an accumulation of errors anywhere. What could be the reason?
I tried changing the channels, but there is almost no difference and I am using the Qualcomm drivers on both devices.
TX/RX Errors TX 560 RX 382 739
I tried changing the channels, but there is almost no difference and I am using the Qualcomm drivers on both devices.
TX/RX Errors TX 560 RX 382 739
Statistics: Posted by ianiovski — Sat Mar 01, 2025 4:45 pm